Key takeaways
- AQL inspection samples a lot and counts defects against a limit; it does not examine every piece.
- Major and minor defects carry different limits, and the buyer should define both against an approved sample.
- An AQL inspection, a lab report and a factory audit each answer a different question.
- Put the defect definitions and the approved sample into the order before production starts.
A buyer who asks how an order is checked usually wants three answers: what is inspected, to what limit, and what each check proves. Quality control for jewelry is not one check. It is several, and each one answers a different question.
What does AQL inspection mean?
The inspection on file runs at two points, with incoming (IQC) and outgoing (FQC) inspection to GB/T 2828.1. IQC checks the incoming material, and FQC checks the goods before they leave. GB/T 2828.1 is a sampling standard. It sets how many pieces are drawn from a lot and how many defects the lot may carry before it fails.
AQL stands for acceptable quality limit. The limits on file are AQL 2.5 for major defects and AQL 4.0 for minor defects, with an overall defect rate of under 1%. A lower AQL number is stricter, so major defects, which hurt use or sale, carry the tighter limit.
Sampling is a statement about a lot, not about each piece. A lot can pass with a few defects in it, as long as the sample stays within its limit. The inspection standard does not describe checking every piece, so the order should not assume that.
What is a major and what is a minor defect?
Generally, a major defect is one that a customer would return the piece for: a broken clasp, a wrong plating color, a loose stone setting, a wrong size. A minor defect is cosmetic and small: a light surface mark that is hard to see at arm's length. The line between the two is not in the standard. It is set by the buyer, against the approved sample.
Write the list in the order. One line for each defect you refuse, and one line for each you will accept. A photo of a good piece and a photo of a rejected piece next to each other settle more arguments than a paragraph of definitions.
Which check proves what?
| Check | What it answers | What it does not show |
|---|---|---|
| Sample approval, by you | Does the made piece match your brief in size, finish, weight and fit? | Whether the bulk run keeps the same standard |
| AQL inspection, IQC and FQC | How many defects were found in the sampled pieces, against the limit | That every piece is free of defects |
| Lab test report | What a named sample showed for a named test | Anything about pieces or finishes the report does not name |
| Social audit | Working conditions at the factory, such as labour standards and health and safety | Product quality |
What does the factory audit cover?
The audit on file is from Bureau Veritas (SMETA 6.1, 2-pillar), reference 2022CNZAA421094484, dated 2022-09-27. SMETA is a social audit: a two-pillar audit generally covers labour standards and health and safety at work. It audits working conditions, not the quality of the jewelry.
What can you check yourself?
Three checks are in your hands and cost little:
- The sample, before bulk. Approve size, finish, weight and fit on the sample. Keep it, so you have the standard to compare the bulk with.
- The lab scope, before you rely on a report. Read what the report names, and compare it with your item. The reports on file are third-party lab tests by CTT, and each covers only the sample it names.
- The packed unit, if the order is for Amazon. For Amazon FBA, prep covers an FNSKU or UPC label on every unit and an individual OPP bag with a suffocation warning. Ask for a photo of a packed unit before shipment and check it against both.
What happens if a check fails, and what to do if you find a fault?
Every order goes through incoming (IQC) and outgoing (FQC) inspection to GB/T 2828.1. If a sampling check fails, the whole batch is inspected before it ships.
If you find a fault or damage after delivery, contact us with photos or video. Photos taken on opening the carton, with the label visible, show the problem most clearly, so keep the first carton unsorted until you have looked at it.
Frequently asked questions
Does an AQL number mean that share of pieces is defective?
No. AQL is a limit used to decide whether a sampled lot passes. It is not a forecast of how many defects a lot contains, and the overall defect rate on file is a separate figure, under 1%.
Is an inspection the same as a lab test?
No. An inspection looks at the goods against a defect standard. A lab test measures what the goods contain or how they behave. The lab report answers a compliance question, and the inspection answers a workmanship question.
What should I write into the order about quality?
The defect definitions for major and minor, the approved sample, and the tests your market needs. Put them in the brief before production starts.
Next step
Send the design with the defects you refuse to accept. The quality page shows how inspection and lab testing sit together, and the process page shows where the sample and bulk approvals fall.




