PVD gold plating and electroplating

Lucky Factory finishes jewelry by PVD and electroplating in 14K and 18K gold, at 0.03–3 µm, depending on the plating method. We measure the coating thickness, and salt-spray, artificial-sweat and wear tests on plated finishes are part of our checks.

Blue-gloved hands lifting a rack of gold huggie earrings out of a plating tank

Two methods

PVD or electroplating: which one your piece gets

The base metal usually decides it: stainless steel takes PVD gold, and brass is electroplated.

PVD gold

A thin, hard gold coating bonded to stainless steel in a vacuum chamber. It suits earrings, huggies and chains worn every day.

Electroplated gold

Gold built up on brass in a plating bath. It suits detailed shapes and seasonal styles, and also comes in colors other than gold.

Thickness

How thick the plating is, and how we measure it

Whichever method your piece gets, the coating thickness is measured after plating.

Plating
PVD and electroplating in 14K and 18K gold
Thickness
0.03–3 µm, depending on the plating method

We read the thickness with a coating thickness tester and its measuring software.

On your sample, check: the thickness reading against the thickness on your quote.

Base metal
  • Plating layer
  • Plating thickness
Coating-thickness readings on the measuring software screen, with a gold-colored sample in a zip bag below
Gold-colored sample, read on a coating thickness tester and its measuring software
Printed coating-thickness readings for chain samples, with a magnified view of a measured spot
Chain samples, thickness reading

Tests

What our plated finishes have been tested for

Thickness is one check; the finishes are tested as well.

Finish tests

Salt-spray, artificial-sweat and wear tests on plated finishes.

Lab report

A gold-plated bangle sample passed the REACH nickel release test after simulated wear, in report CTT2509060651EN.

Your sample

What to tell us, and what to confirm on your sample

Plating is set per style and color, so these are the points to agree on.

Tell us

The base metal, the gold tone and the look you want. You can mix styles in one order; the minimum applies to each style in each plating color, not to the whole order.

Confirm on your sample

The plating color against the gold tone you chose, the thickness reading, and an even color with no marks.

Next step

Ask about plating for your styles

Tell us the styles and the finish you want, and we suggest a method and quote it.

  • Styles

    Photos, links or sketches, or the ready designs you picked.

  • Base metal and gold tone

    Stainless steel, brass or 925 silver, and the gold tone you want.

  • Quantity per color

    Pieces per style in each plating color.

  • Target date and destination

    When you need them and the country or FBA warehouse.

Not sure which method fits? Send a photo and your target price, and we will suggest one.

Send files by replying to our email or on WhatsApp.

One quick check, then we send your brief.

First reply within 12 hours, a quote within 24 hours.

See how we use your details in our Privacy notice.

Chat on WhatsApp