Test reports
Read the third-party lab reports, and what each one does and does not prove.
At Lucky Factory a new design goes from a CAD drawing to a sample to bulk, and you approve each step before we move to the next. A cast design needs a mold first. The CAD drawing comes within 48 hours, the sample takes about 15–35 days and bulk production about 20–40 days, with wire-cut designs at the short end of each range and cast designs at the long end.

Approvals
| Step | Days | You receive | You approve | What this step catches |
|---|---|---|---|---|
| CAD drawing | 48 hours | The CAD drawing of your design | The drawing, the measurements and every detail | Wrong size or shape |
| Mold, for cast designs only | 5 days | A mold plan with its fee | The mold plan and the fee, before the mold is made | — |
| Sample | 15–35 daysShorter for wire-cut, longer for cast | The real sample piece | Size, finish, weight and fit | Plating color that is off |
| Bulk | 20–40 daysShorter for wire-cut, longer for cast | — | The sample and the specification sheet, before bulk starts | — |
| Inspection | — | — | — | Defects across the batch: AQL 2.5 major, AQL 4.0 minor |
| Packing and labels | — | — | — | Wrong or missing FNSKU or UPC barcodes |
At the bench
These are the steps your pieces go through between approvals, with what to check on your sample at each one.

ACast designs
Wax models are injected from rubber molds and set on a tree for casting, from your approved drawing.
On your sample, check: the shape, size and fine details against the approved CAD drawing.
Wire-cut and chain designs skip the wax step.

B
Pieces are ground and polished, then given the surface finish you chose.
On your sample, check: the surface finish, and that edges are smooth with no scratches.


C
Pieces are plated or PVD-coated in the color you chose, then the coating thickness is measured.
On your sample, check: that the plating color matches the color you chose, and the plating thickness (0.03–3 µm, depending on the plating method).

D
We engrave your logo here, or attach logo hangtags with jump rings. We also offer engraving for small personalized batches, such as names or initials.
On your sample, check: the logo size, position and sharpness.

E
Parts and finished pieces go through incoming (IQC) and outgoing (FQC) inspection to GB/T 2828.1.
On your sample, check: an even finish and plating color, with no marks.

F
We assemble and pack your pieces as ordered. For Amazon FBA orders, we put an FNSKU or UPC label on every unit.
On your sample, check: the labels and barcodes, and the packaging against your order.
Verify
Our test reports and company registration are there for you to read and look up.
Read the third-party lab reports, and what each one does and does not prove.
Look up the company registration and see the factory audit.
Next step
Tell us what you want made and we will reply with the steps, days and fees that apply to it.
A sketch, photos, a CAD file or a physical sample.
Base metal, plating color and any logo.
Pieces per style for the first order, and when you need them.
Not sure which steps your design needs? Send what you have and we will tell you.
Thanks, your brief is in. We will reply by email to .
First reply within 12 hours.
Send your brief by email or WhatsApp and we will reply.
First reply within 12 hours.
See how we use your details in our Privacy notice.