Shape and detail
Compare the piece with the approved CAD drawing, including the fine details.
We make cast jewelry by the lost-wax method at Lucky Factory in Dongguan, China. Send a sketch, photo or CAD file: the CAD drawing comes within 48 hours, a cast sample takes about 35 days and bulk about 40 days.

Cast or cut
Casting suits pieces with depth: domed shapes, sculpted details and textures. Flat shapes are usually cut instead, which is faster and needs no mold.
Cut from flat metal. No mold and a faster sample; good for tags, outlines and flat charms.
Made from a mold, for three-dimensional shapes and textures. The mold takes 5 days.
For flat or simple shapes we may suggest cutting or stamping instead, and we tell you which with your quote. Cast pieces can be set with zircon, rhinestones, pearls, opals or natural stones.
Laser and wire cutting for flat designs Stamped jewelry Stone set jewelry
Step by step
If casting fits your design, this is what happens to it between the approved drawing and the finished piece.
A

We make a master model from your approved CAD drawing, then a rubber mold from the master.
B

Wax is injected into the rubber mold, and each wax model comes out in the shape of your piece.
On your sample, check: the shape, size and fine details against the approved CAD drawing.
C

The wax models are set on a wax stem, so many pieces are cast at once.
E

Each piece is cut from the tree, ground and polished, then plated or PVD-coated in the color you chose.
On your sample, check: a clean surface with no pits or rough spots.
Days and fees
These are the days and fees for a new cast design.
| Step | Time or fee |
|---|---|
| CAD drawing | 48 hours |
| Mold | 5 days |
| Cast sample | About 35 days, US$50–200 |
| Bulk production | About 40 days |
Sample fees are credited once the order reaches 500 pieces.
The mold fee is set per design and listed on your quote. Whether the mold fee is refunded depends on the order.
Your sample
Before bulk starts, you approve the cast sample. These are the points to check.
Compare the piece with the approved CAD drawing, including the fine details.
Measure the size, and weigh the piece if you set a target weight.
Look for a clean surface with no pits or rough spots.
Check that stones are set firmly and that the plating color matches the color you chose.
Next step
A sketch or photo is enough to start; we reply with the steps, days and fees for your piece.
A sketch, photos, a CAD file or a physical piece.
The size you want, and a target weight if you have one.
Base metal, plating color and any stones.
Pieces per style and plating color, and when you need them.
Not sure your design should be cast? Send a photo and we will tell you.
Thanks, your brief is in. We will reply by email to .
First reply within 12 hours.
Send your brief by email or WhatsApp and we will reply.
First reply within 12 hours.
See how we use your details in our Privacy notice.